Scope Content to Specific Grade Level

General Information

Scoping content to specific grade levels will only work on 1:1 student iPads.

Create Grade-specific Smart Device Group

We suggest creating a separate Smart Device Group per grade level.

  1. Log into Jamf console:
  2. Click Devices.
  3. Click Smart Device Groups.
  4. On the right, click +New.
  5. Give the group a name. The naming convention should be LocationNumber-Grade X (where X is the grade level).
  6. Click Criteria tab.
  7. On the right, click +Add.
  8. At the top-right, click Show Advanced Criteria.
  9. Locate Grade and click Choose to the right.
  10. Leave Operator to is.
  11. In the Value field, input the grade level. Acceptable values are:
    1. KG
    2. 01
    3. 02
    4. 03
    5. 04
    6. 05
    7. 06
    8. 07
    9. 08
    10. 09
    11. 10
    12. 11
    13. 12
  12. At the bottom-right, click Save.

Scoping to a Smart Device Group

  1. Within an app or configuration profile, click the Scope tab.
  2. Make sure the Targets tab is selected.
  3. In the Target Mobile Devices drop-down, select Specific Mobile Devices.
  4. In the Target Users drop-down, select Specific Users.
  5. If there are any mobile devices listed in the Targets, remove them.
  6. Click the +Add button.
  7. Click the Mobile Device Groups tab.
  8. To the right, click Add next to one or more of the grade-specific smart groups you created earlier.
  9. Click Done.
  10. At the bottom-right, click Save.

Your app will only deploy to the grade level smart groups that you added to the scope.